TME Open Reel Tape Deck Real Aluminum Sensing Foil 1/4" X 54 Ft with Removable Backing Paper Liner

  • List Price: $20.00
  • Sale Price: $14.99
  • Amount Saved: $5.01
  • Availability: Usually ships in 24 hours

Feature

  • True Aluminim Soft Foil with Special Adhesive for Recording Media
  • Peel Off Removable Release Paper Backing Allows You to Cut It Angled or Straight Across with Splicing Block
  • .25" X 54 Feet on 3" Plastic Core
  • Can Add Sense to over 640 tapes (one end)
  • Adhesive Will Not Get Brittle

Product Description

This brand new sensing foil made in Europe is real foil with a non oozing silicone adhesive. Unlike "faux" foils we see people selling which are "vapor evaporated aluminized plastic", this is the real thing. This is used on any audio tape deck using foil for auto reverse and/or auto stop sensing like some TEAC models. The foil comes on a 54 foot roll on a 3" plastic core with backing release paper which you remove. TME chose to use the backing release paper rather than having the foil stick to itself on the roll to keep the foil surface as clean as possible and to allow you to easily cut the foil on a splicing block before application. Each roll should have enough foil for one end of 640 tapes. To use: Cut about 1" or so (depending on your deck's sensitivity), peel off the backing paper and using a splicing block, center and apply the foil to the surface of the tape where your sensors are. This is almost always the side of the tape away from the heads and NOT the oxide side. There should be a slight gap between the edge of the foil and the edge of the tape if centered properly but this is not critical.

Product Detail

  • Product Dimensions: 4 x 4 x 0.25 inches; 0.13 pounds
  • Shipping Weight: 0.13 pounds
  • ASIN: B00DNK6LG6
  • Item model number:
Customers Who Viewed This Item Also Viewed

Comments

Write a Reply or Comment:

Your email address will not be published.*